Air X Wind Generator Marine
Off Grid Renewable Energy Solar Wind Setup PLANS
| Account limit of 2000 requests per hour exceeded. |
Compare____________________________________________________
|
|
AIR-X Marine 12VDC Wind Generator $720.00 |
|
|
24V or 48V AIR-X MARINE 400W Wind Generator TURBINE w/ Regulator - MADE in USA $899.50 |
|
|
Sunforce 44446 Air X Marine Wind Turbine Generator NEW $1,079.99 |
|
|
MARINE AIR-X & BREEZE Wind GENERATOR Turbine 5-piece ELECTRICAL ACCESSORY Set $99.50 |
|
|
24 Volt 400 Watt Air-X Marine Turbine $50.00 |
|
|
Southwest AIR-X & BREEZE Marine TOWER HARDWARE KIT for Wind Generator Turbines $249.50 |
|
|
AIR-X Marine TOWER Mast & Stays for Wind Generators NEW $459.50 |
|
|
50 amp SEALED 50A STOP SWITCH for Marine AIR-X or BREEZE Wind GENERATOR Turbines $27.50 |
_____________________________________________________
Compare____________________________________________________
|
|
Garmin Gws 10 Marine Wind Sensor Bundles $599.99 Garmin Gws 10 Marine Wind Sensor Bundles . The GWS10 is a NMEA2000 compliant masthead sensor which provides wind speed, wind angle, barometric pressure and air temperature data. It comes with a 30 meter cable and inline terminator so that it can be the last sensor in a NMEA 2000 network. While it's intended to work with Garmin's color GMI10 display, it can work with other Garmin NMEA2000 products as well as other vendors' displays. Purchase the GWS 10 sensor alone, or at substantial cost savings when bundled with the GMI 10 display, or with the GMI 10 and a thru-hull Intelliducer that monitors depth, speed and water temperature. Display Type: GMI 10 3.5" QVGA color display included with bundles, Marine Wind Sensor compatible with other NMEA 2000 displays Speed Range: 0 to 99.9 knots Speed Resolution: Tenths of knots Controls: Graphical menu interace with 4 buttons Dimensions: Masthead sensor: 19 11/16"W x 22 5/8"H x 5 1/2"D, Display: 4.3" x 4.4" x 1.9" Mounting Hole Size: 3 1/2" Warran |
|
|
Superwind 350 Wind Generator Replacement Blades $289.99 Superwind 350 Generator Replacement Blades . Replacement Blade for 350 Wind Generator. Carbon-fiber reinforced blades, optimized to induce micro turbulence, combine outstanding aerodynamic performance with super-quiet operation. Integrated rotor control system continuously adjusts the pitch of the blades to minimize noisy stall effects and limit rotor speed during even the most extreme wind velocities. |
_____________________________________________________
Mail this post
